Home > Medical Device Testing Equipment >

External Circuit Flammable Mixer Test Device for Medical Electrical Equipment IEC60601-1

Product Categories

Electrical Appliance Testing Equipment [365]
Energy Efficiency Lab [43]
Vehicle Testing Equipment [134]
Battery Testing Equipment [66]
Switch Life Tester [269]
Led Testing Equipment [70]
Water Ingress Testing Equipment [82]
Environmental Test Chamber [103]
Flammability Test Chamber [60]
EMC Test Equipment [24]
Medical Device Testing Equipment [34]
IEC 62368 Test Equipment [73]
Test Equipment For Electric Lab [22]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

External Circuit Flammable Mixer Test Device for Medical Electrical Equipment IEC60601-1

Name: External Circuit Flammable Mixer Test Device for Medical Electrical Equipment IEC606011
Brand: Sinuo
Price: 1 USD

Best External Circuit Flammable Mixer Test Device for Medical Electrical Equipment IEC60601-1 wholesale

Brand Name : Sinuo

Model Number : SNM15

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Price : Customized

Payment Terms : T/T

Supply Ability : 20 Sets Per Month

Delivery Time : 30 Days

Packaging Details : Plywood

Circuit under test : External

Equipment weight : 150kg

Test station : Single station

Test speed : 0~100r/min

Test time : 0~99H59M59.9s

Drive mode : Stepper motor drive

Power supply : AC220V±10%/50-60Hz

Equipment dimensions : 800×600×1500 (mm) W×H×D

Contact Now

IEC60601-1 Flammable Mixer Test Device Medical electrical equipment

Product Information:

1. Standard: conform to IEC60601-1:2012 Annex G.7.

2. Samples and restrictions: ME equipment, ME equipment parts and components heating flammable and anesthetic gas mixed with oxygen or nitrous oxide.

3. Application: For use in ME equipment areas heated with flammable and anesthetic gases mixed with oxygen or nitrous oxide, when disinfecting or cleaning skin with flammable anesthetics or flammable agents if the anesthetic or flammable agent is mixed with air or with oxygen or nitrous oxide After the nitrogen is mixed, check whether the sparks generated by the heating circuit of the heated ME equipment will ignite the anesthetic gas and check whether there is a risk of explosion.

4. Test principle: A motor is used to drive the shaft connected to the tungsten wire disk to rotate at a speed of 80r/min. The tungsten wire and the cadmium disk generate sparks by opening and closing the circuit under test, igniting the flammable anesthetic gas filled into the cavity, and verifying that the tungsten wire and the cadmium disk are used in conjunction with oxygen. Safety of circuits under test for ME EQUIPMENT heated by flammable anesthetic gases mixed with nitrous oxide or nitrous oxide.

Technical Parameters:

Equipment structure	The test device consists of an ignition chamber and a contact device. The ignition chamber has a volume of at least 250cm³ and contains the specified gas or gas mixture. The contact device generates sparks by opening and closing. The contact device consists of a disk with two slots and another disk with four 0.2mm diameter tungsten wires. ; The free length of the second disc sliding the tungsten wire on the first disc is 11mm. The shaft connected to the tungsten wire disk rotates at a speed of 80r/min. The shaft connected to the spoke disk and the shaft connected to the tungsten wire disk rotate in opposite directions. The speed ratio of the shaft connected to the tungsten wire and the other shaft is 50:12. . Equipment dimensions: approximately: 800×600×1500 (mm) W×H×D, equipment weight: 150kg
Usage environment	Power supply: AC220V±10%/50-60Hz, power 0.3KW
Model	SNM15
Test station	Single station
Electrical control method	PLC intelligent integrated control, 7-inch human-machine touch interface operation
Drive mode	Stepper motor drive
Test speed	0~100r/min (can be preset), the speed of tungsten wire disc and cadmium disc is 50:12
Test time	0~99H59M59.9s (can be preset)
Circuit under test	External
Tungsten wire	Diameter 0.2mm
Gas flow	External connection, access flow rate is adjustable from 0.3-3L

External Circuit Flammable Mixer Test Device for Medical Electrical Equipment IEC60601-1

Product Tags:

IEC60601-1 Flammable Mixer Test Device

External Circuit Flammable Mixer Test Device

External Circuit Flammable Mixer Test Device for Medical Electrical Equipment IEC60601-1 Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!